The R & D center of KELAIWEI company added new strength, and KELAIWEI Nano Carbon Material Co., Ltd. established deep cooperation with relevant industry experts of Zhengzhou University of light industry. KELAIWEI company hired Professor Wang Lizhen as our technical consultant. KELAIWEI company firmly believes that with the cooperation of Professor Wang, the R & D strength of KELAIWEI company will be strengthened. KELAIWEI company always pays attention to technical cooperation and communication with professionals at home and abroad.

What is carbon crystal? After more than 20 years of research, the technology center of KELAIWEI company, it has been able to manufacture and process ultra-high purity whisker carbon nanotubes with purity up to 99.95% Henan KELAIWEI carbon nanotube material Co., Ltd. and many high-end battery manufacturers at home and abroad found in the practical application research, whisker carbon nanotubes is an ideal conductive additive for positive and negative electrode materials of lithium batteries, which can effectively improve the battery life and capacity. What is carbon crystal.

Chinese people have always attached importance to health preservation. A well-known domestic brand manufacturer in the field of physical therapy health also deeply felt the cruelty of market competition. More and more peers appeared and more and more peers fell down. Only by improving product performance and technical advantages, in order to remain invincible, we started a new round of bidding for raw materials, and finally found that our company's far-red paper could increase the far-infrared emissivity of physiotherapy instrument by 3%, and the customer immediately signed a supply contract with our company.

Henan KELAIWEI Nano Carbon Material Co., Ltd. is an expert in R & D and manufacturing of high-end nano materials and nano materials production equipment. KELAIWEI guarantees that the ex-factory products fully meet the industry's advanced standards, provide you with nanomaterials conforming to national standards and international standards, and provide after-sales service for technicians, so that you can buy them at ease and use them comfortably. KELAIWEI is always ready to provide you with products and services.

The project of the annual output of carbon nanotubes of Henan KELAIWEI company reaching 300 tons has been implemented Henan Kaifeng Henan KELAIWEI company has invested 0.45 billion yuan in the research and development, production and manufacture of high-end nanomaterials and equipment to promote social development with science and technology, to create convenient and effective products for people through science and technology at the same time, KELAIWEI company insists on promoting the development of the company with high and new technology products and contributes little to the economic development of Kaifeng. What is carbon crystal.

Henan KELAIWEI carbon nanomaterials Co., Ltd. has established a professional production and sales center and a technical after-sales service center, and has established a scientific and rigorous management system. The production technicians of KELAIWEI company will do their best to analyze and solve practical problems and needs for you according to your needs, and can provide professional product technical consultation for free, we are very happy to provide you with products that meet your needs. KELAIWEI looks forward to maintaining deep cooperation with you and jointly developing the whisker carbon nanotube market.

Henan KELAIWEI nano carbon material company, relying on its profound technical deposits of high-end nano materials, makes the enterprise go to the fast lane of rapid development. The production line of several nanomaterials built by KELAIWEI company with 0.45 billion yuan the year before last will increase the annual production capacity of 300 tons of whisker-like carbon nanotube powder. With advanced technology and 6S lean management, KELAIWEI company creates word-of-mouth products for customers.

In terms of big industries, consumer goods and manufacturing industries have different shooting contents and methods in videos, which is also related to different channels of promotion chosen. When making promotional videos of enterprises, enterprises should analyze the characteristics of the industry and effectively transmit enterprise information and industry information. The difference between industries is the most obvious in the promotional films of products. The main reason is that consumers in different industries have different focuses when buying products, and the main selling points of enterprise products are different.

Since Enterprise videos are so important, how can we make videos? Generally, video production is divided into four steps: video planning, writing scripts, video material shooting, editing and post-production video planning, to determine the creative ideas of video shooting and whether the publicity materials can stand out, most of them depend on video creativity, which is the soul and link of the documentary. If you want to have high-quality creativity, you need to think differently, which users the video faces, what are the specific needs of users? Are all atoms of carbon nanotubes coplanar.

What scenarios can Industrial 3D animation be used in? First, all kinds of promotion ways of enterprises, such as exhibitions and enterprise websites, can not only show product details and highlight product advantages, but also show the strength of enterprises. Second, 3D animation can also be used to report to high-level departments, investors, government agencies and other senior departments. 3d animation displays information comprehensively, truly and effectively, so that viewers can fully understand products or projects, help viewers make correct decisions.

Are all atoms of carbon nanotubes coplanar? We always suggest that enterprises prefer excellent shooting teams and use excellent creativity in video shooting. In this respect, enterprises must not reduce their budgets for costs. Before shooting, the enterprise is the person who knows the industry best, the Enterprise best and the product best. How to effectively show the advantages of the product and how to attract customers' interest in the product, etc, enterprises should have their own ideas before shooting. And communicate these ideas with video producers to help video producers produce ideas.

Product videos are also widely used in enterprise promotion. They can be used not only on the product details on the official website of the enterprise, but also on B2B platforms or overseas platforms. Compared with enterprise promotional videos, enterprise product promotional videos are more targeted. They can be targeted at a series of products or a single product. Through this kind of video, customers can form a more complete understanding of this product and promote the purchase of potential customers.

Therefore, in the production of Enterprise videos, not a single video is in the world, and not all video content is suitable for promotion through channels. Enterprises should make different lengths and contents according to different promotion channels or different targets, and make more targeted enterprise videos. As its video source is welcomed by enterprises, it has gradually become the main promotion method for enterprises. More refined food classification will help enterprises with their video promotion goals.

The length of the film determines the total price of 3D animation. The longer the film is, the higher the price is, because every image needs the producer of 3D animation to design or process, which requires a large amount of work. Generally, the recommended optimal duration of different types of 3D animation is also different. For example, as a product, the product content and related information are generally introduced, which is suitable for short time description, more film length should be used in the description of key product information.

In the choice of advertising video shooting, enterprises should first conduct research on themselves, such as making clear the competitive position of enterprises in the industry, the competitiveness of enterprises, when necessary, the content such as the overall strength and advantages of the enterprise needs to be sorted and saved in the form of text or pictures, to provide more materials for later or future promotional video shooting, can nanotechnology be used in carbon fiber.

The video is a kind of video that enables the enterprise to shoot in a planned way through the performance method of TV movies, and then display to the viewers after the work of editing and beautifying the soundtrack in the later stage. Video is widely used, which can be applied not only to the publicity of enterprises, but also to promotion channels such as exhibition advertisements. Of course, different application scopes have different requirements on video, materials, creativity and so on are also different. Basically, the purpose of the video is to help viewers understand the content of the video more quickly.

In the work, we often use 3D animation. For example, in the aspect of film and television advertisement production, many films have used 3D animation to realize some special effects, there are also some advertising products of enterprises that use 3D animation to display for customers. For example, when buying a house, 3D animation is used to display the whole house type and community, use 3D animation to show the operation method of precision machinery, etc.

In the early stage of communication, enterprises need to make clear their own needs first. The clearer the needs and communication are, the smoother the video production process will be. After video shooting is minimized, of course, from some professional perspectives, we refer to the relevant opinions of video service providers or directors from China Construction Corporation. After all, it is convenient for video shooting and effect presentation, the service provider is relatively more professional. Can nanotechnology be used in carbon fiber.

Compared with image and text transmission methods, videos are more easily accepted by the public. The reason is that people can reach the state of what they see is what they think by watching videos, and they can understand the deep meaning without thinking more. In short, it is more energy-saving. Thanks to the existence of various video platforms, videos are easier to share than other communication methods, which allows many people to see the promotional videos of enterprises in a short time, expand the scope of Enterprise publicity.

Nowadays, the use of Internet promotion has formed a big trend. Both small and medium-sized enterprises and large enterprises hope to promote enterprises in various ways to gain the trust of customers. In the production of Enterprise videos, in order to have good video effects, in addition to finding highly skilled video manufacturing service providers, enterprises themselves need to provide more comprehensive information or materials, supports video service providers.

Three-dimensional mechanical animation is highly praised by mechanical enterprises, not only because it can accurately express relevant information, but also can reduce the cost of enterprises to a certain extent. For example, when enterprises participate in various exhibitions at home and abroad, the transportation of mechanical equipment is a very important cost. Through the display of three-dimensional mechanical animation, enterprises can avoid the loss of large-scale equipment during transportation without having to transport all the large-scale equipment to the display site.

Is carbon nanotube particles conductive? For convenience products in consumption frequency, we hope more to highlight the product quality or quality control through the description of the affiliated enterprises. For example, Devil supermarket will publicize the advantages of the whole supermarket through video shooting, such as geographical location, transportation and other factors, but it will not only publicize a certain kind of vegetable or a certain kind of fresh product. If shooting the propaganda film of this kind of product, the cost will be too high and the profit will be too low, and the effective relevant information cannot be transmitted, is carbon nanotube particles conductive.

For manufacturing enterprises, it is very necessary for each enterprise to have its own video. The video vividly shows the overall environment, spiritual outlook, prominence and strength of the enterprise, so that different types of viewers can obtain the information they want, thus establishing favorable impression and preliminary cognition of the enterprise, lay the foundation for the follow-up cooperation. Enterprise videos can also reflect the spiritual culture of the enterprise, such as the spiritual outlook of employees, the ingenuity of production, and the high standard requirements for the quality of products and services.

The development and use of 3D animation depend on the development of computer 3D imaging technology. Its characteristics also determine that it will be paid more and more attention by people, and it can convey information to users more intuitively through various ways, especially suitable for projects that have not yet been realized and are astonished after realization, it can make the audience feel the elegant demeanour after the project ends in advance, which can increase the confidence of investors, increase the information of users and increase the cognition of users.

After shooting each scene, we need to install the video planning method to integrate and optimize the video clips. It mainly includes two common links: 1. Determine whether the video elements are available, whether they meet the goals in video planning, and whether the content to be expressed in the video can be transmitted completely; 2, we need to connect different video elements through professional methods.

The content and structure of product videos vary according to different types of products. As we have mentioned before, for consumer goods products, we need to highlight the value that products bring to customers. For example, Huawei's mobile phone downloads more high-tech chips, no matter what content it deals, can be quickly implemented to improve work efficiency. The improvement of work efficiency is the value that products can bring to customers, and of course, it can also have spiritual value.

We divide Enterprise videos into enterprise commercial videos and enterprise promotional videos. The quality of the enterprise propaganda video is mainly based on the enterprise itself, and it comprehensively introduces the relevant contents of the enterprise, aiming at establishing the image of the enterprise and building the brand of the enterprise, let customers and potential customers have a comprehensive understanding of the enterprise and form a preliminary impression on the enterprise. However, commercial videos of enterprises mostly refer to videos that are mainly for promotion purposes and published on various promotion channels.

Three-dimensional mechanical animation is mainly aimed at mechanical equipment. Through simulation technology, the mechanical equipment can be split, integrated, rotated and other technical means, so that the internal structure of the mechanical equipment can be fully and comprehensively displayed in front of the viewers. At the same time, 3D mechanical animation can also display the information of mechanical equipment's operation mode, Operation principle or the operation of assembly line to the viewers through 3D animation.

In consumer goods categories, not all products are suitable for product promotion videos. Post-it refers to the daily necessities that we often use and need to be purchased frequently. Product attributes such as product prices and functions are not the main contents to be considered when purchasing. In other words, when purchasing convenience products, consumers can directly purchase them without comparison. For example, if you buy fresh products, vegetables and fruits, it is not recommended to shoot promotional videos of products.

The content to be prepared in advance for Enterprise videos. In addition to the materials used for video shooting, the following content should be prepared: 1. Background music. Good background music can be combined with video materials to better highlight the scene and emotion of the content; 2. Voice-over. The language and text materials of voice-over can be combined with video and background music materials, and the information to be transmitted can be accurately expressed by voice. In the selection of voice-over, you also need to select the corresponding type of timbre to match the video.

Mechanical enterprises usually need to go through three steps to create their own industrial models through three-dimensional animation: 1. Modeling. Modeling means that designers should design their models for specific products according to product pictures, design drawings, Assembly drawings and other documents. The models of each product are different. 2. Animation production. After the model is completed, animation should be made according to the model. The goal of animation production is to clearly present the operation principle and production process of machinery. 3. Later. Perform post-production for animation production. The later stage mainly includes rendering work to make 3D animation look more real.

The shooting script refers to the description of each scene, including brand-new text and Hua Weiyin content when necessary. Through the shooting script, you can clearly understand what content should be presented in the current picture or scene, and help the shooting personnel to clearly define the shooting scene and the content to be shot. Script writing also has certain rules, such as personnel, scene, emotion and content expressed, etc. Different people and videos are also slightly different when writing scripts.

Many key nodes of enterprise development need to show the current strength, development prospect, development plan and other information to important partners through Enterprise videos or related videos, help customers build confidence in the enterprise. At this time, the quality of Enterprise videos greatly affects the quality of information transmission. High-definition and cool Enterprise videos also show the current strength of enterprises, adding to the cooperation between enterprises and partners.

For the new market that the enterprise wants to explore, the propaganda video of the enterprise is more to open up the market, that is to let the market have a more comprehensive understanding of the enterprise and form a basic understanding of the product or service, and summarize the main selling points of the products, attract customers to buy and use, thus gradually forming the recognition of products or services. In this new market, video production is more important. Product features and enterprise features are conveyed.

Can carbon nanotubes be washed with open water? If enterprises only do three-dimensional animation and use it in the propaganda of small-size videos, then the requirements for clarity can be appropriately reduced, or reduce the requirements for video resolution. Both of these two methods can ensure that users can see clearly the relevant information of products or enterprises in small-sized videos, the difference between the two cannot be distinguished by naked eyes. Can carbon nanotubes be washed with water.

Three-dimensional animation distinguishes different employment directions through different processes in employment. Students who want to learn three-dimensional animation should first clarify their main employment directions and consider their own qualities and skills, choose the major that suits you best among the numerous employment directions of 3D animation industry, the Internet is also an important employment field, which can be combined with other industries to make full use of the advantages of 3D animation, which is the best carbon nanotube floor heating enterprise.

Enterprises usually seek help from corresponding external service organizations when making videos. At this time, the enterprise needs to clearly inform the video shooting organization of the demand for shooting videos and the goals to be achieved, and there are video shooting organizations to generate video ideas for the enterprise. When necessary, enterprises also need to provide relevant materials for shooting agencies. The video shooting organization will use the method of video shooting to reasonably edit these materials together to express the inner theme of the video.

Which enterprise is strong in carbon nano-tube floor heating? When enterprises display products through 3D animation mode, they usually need to provide assembly drawings or parts drawings of mechanical equipment or parts, which will be the basic material of 3D animation. As animation designers, they need to model products based on these pictures. Only when the model can clearly express the product status can they proceed to the next step. 3D animation companies with higher level will also add more interesting elements to the creativity to impress the audience.

Enterprises usually have some misunderstandings when making videos. The existence of these misunderstandings will affect the production effect of Enterprise videos. 1. The Enterprise believes that it can present all aspects of the enterprise through a video, and only needs to shoot a video, which will save more budget. 2. The management of the enterprise is relatively older and prefers the traditional video form and style. 3. No matter what video is shot, the shooting requirement for the video is low cost.

For many foreign trade enterprises, how to quickly open the Taiwan market, how to effectively transmit the strength and image of the enterprise, and how to quickly close the distance with overseas customers, how to overcome the physical distance is a problem that every foreign trade enterprise should focus on solving. Overseas Enterprise videos are a powerful tool to solve these problems. Through the video of the enterprise overseas potential customers can have a preliminary understanding of the strength of the enterprise and the development status of the enterprise.

Enterprise videos have different promotion channels due to different types, aiming at different stages of enterprise development. From the beginning of the enterprise's entrepreneurship, the enterprise wants to shoot videos with products as the main theme, and the main purpose is to increase the sales volume of products through the videos of products so as to obtain more profits. This kind of product does not have high requirements on the special effects of videos and videos. It is more important to highlight the selling points of the product's functions, user experience, and the main parts that can resonate with users.

Three-dimensional film and television animation refers to the application of three-dimensional animation in film and television, which is a common type in our daily life, such as special effects used in cartoons and film and television blockbusters, etc, it also includes 3D animation, 3D model and other contents commonly used in the film. Compared with other types of 3D animation, the focus of 3D film and television animation is mainly to combine with the content of the film, create atmosphere and use cool animation techniques.

Is carbon nano-tube brake pad easy to use? KELAIWEI company's second series of "reviewing the development history · encouraging young talents to compete bravely": KELAIWEI's outstanding achievements in technology in 2008. KELAIWEI company focuses on the research of various kinds of whisker carbon nanotubes. Professor Sun, the chief engineer, led the team to tackle key problems for several years, and finally successfully prepared whisker carbon nanotubes in 2008, which helped our country to further break the foreign blockade of whisker carbon nanotubes technology in our country. It also sets up the basic methods and product development direction of our company's technology research and development.

The transparent conductive film made of carbon nanotubes has ultra-high conductivity and ultra-high transparency in the visible light range, so it is highly sought after by manufacturers. Carbon nanotubes not only have excellent strength (100 times the strength of steel), but also have high stability and conductivity, and also have very good thermal conductivity. Because it is widely used in the production of Transparent Conductive Films.

Chinese people have always attached importance to health preservation. A well-known domestic brand manufacturer in the field of physical therapy health also deeply felt the cruelty of market competition. More and more peers appeared and more and more peers fell down. Only by improving product performance and technical advantages, in order to remain invincible, we started a new round of bidding for raw materials, and finally found that our company's far-red paper could increase the far-infrared emissivity of physiotherapy instrument by 3%, and the customer immediately signed a supply contract with our company.

Is carbon nano-tube brake pad easy to use? KELAIWEI company has mastered the core technology after more than 20 years of research and development. It owns nine national patents, two international PCT patents, more than 40 technical papers, and the publication of two monograph on carbon nanotubes lays the technical advantage position of our company in the industry. Technical progress benefits from the continuous investment of research and development funds by our leadership and the research and development of special technology by Professor Sun Xiaogang for more than 20 years. The research on carbon nanotubes of KELAIWEI company is unique in the world, and we look forward to your joining and cooperation.

In order to celebrate the International March 8th Women's Day, Henan KELAIWEI company and Henan Xinbo company held a female worker Forum together to condole our female employees in the form of physical condolence and discussion and communication. KELAIWEI company actively recruits female employees, respects them, creates a good working environment for them, and provides them with necessary welfare benefits according to laws and regulations. Female employees will always be a beautiful scenery of our company and an indispensable force for the development of our company.

KELAIWEI nano-carbon material technology company aims at international advanced technology equipment and nano-material technology achievements, and relies on the R & D personnel of KELAIWEI to carry out independent research and development of special technology and make continuous breakthroughs, continuously provide high-end nanomaterials products for domestic and foreign cooperative customers. KELAIWEI Henan sales center and Jiangxi sales center continue to expand overseas market cooperation and have established cooperative relations with some enterprises in more than 60 countries.

Henan KELAIWEI has a very perfect product research and development system, quality control system and after-sales service system in the industry KELAIWEI company from the project development of products to industrial production, there is a strict standard system of testing and assessment in every link of testing and so on. Clayey is committed to becoming a leader in the high-end nanomaterials industry, serving customers with advanced technology and delivering customers with high-end products, is carbon nanotube brake pad easy to use.

Not all enterprises need to use three-dimensional animation before making propaganda films. Whether to use it or not depends on whether to reveal complex principles through three-dimensional animation in the propaganda films. The production cost of 3D animation is high, and not all enterprises need to solve the problem of information transmission through 3D animation. Therefore, from the perspective of reducing costs, enterprises can choose according to the characteristics of products.

From the perspective of information transmission, through the form of what you see is what you get, the video can easily show the soft power of the Enterprise to the viewers vividly and intuitively, so that the viewers can have intuitive experiences and feelings, therefore, video has become the favorite publicity method for many enterprises. The new promotion method of short videos also makes the production of Enterprise videos more popular. Short videos are short in time and spread quickly, which also contribute to the promotion effect of Enterprise videos.

The development and use of 3D animation depend on the development of computer 3D image technology. Its characteristics also determine that it will be paid more and more attention by people and transmit information to users more intuitively through various ways, it is especially suitable for projects that have not yet been realized and are shocked after being realized, which can make the audience feel the elegant demeanour after the completion of the project in advance. In this way, the confidence of investors can be increased, the information of users can be increased, to increase users' cognition, whether the production process of carbon nanotubes belongs to chemical industry or not.

As we have mentioned before, there are many different types of enterprise videos, such as enterprise image videos, cultural videos, product videos or project videos. Different videos have different shooting contents, the process and results of shooting will also be slightly different. No matter what type of video it is, it is basically the same on the basis of video production, starting with video planning.

Various videos of enterprises can help buyers at home and abroad to quickly understand the relevant information of enterprises and products, achieve a sense of trust in enterprises, even omit the process of live singing and form a deal. Especially in the early stage of contact with customers, salesmen don't have to spend too much energy explaining or explaining the relevant problems of the enterprise. Such effects can be achieved by playing high-quality enterprise videos.

Enterprise Commercial Video type two three, micro film micro film is through a short story, subtly influence customers, let customers understand the value of products to life four, virus Video virus video is a kind of humorous and funny content to get viewers to share, click, comment, share, download and other ways, and it is widely spread, thus obtaining more traffic, to help the promotion of enterprises, whether the production process of carbon nanotubes belongs to chemical industry.

The price of 3D animation is often related to the selection of animation type, requirement of clarity, film length, special effects, dubbing, region, etc. Because of the influence of these factors, the price of 3D animation in the industry is often not transparent, and it is not necessarily that the quality of 3D animation with high price will be good, the cheap 3D animation is not necessarily of poor quality. Users need to compare their needs in actual investigations.

Is the mass production of carbon nanotubes possible? The technological achievements of Henan KELAIWEI Nano Carbon Material Co., Ltd are continuous. Under the leadership of Professor Sun, the chief engineer of KELAIWEI's technical team, once again obtained the technical patent in the synthesis of whisker carbon nanotube materials. It is reported that the technical patent number obtained this time is "ZL201210304345.7". The technical name is "automatic and continuous production of whisker carbon nanotubes synthesis device".

Nanomaterials have wonderful uses in carbide manufacturing. Carbide products using nanomaterials have better performance than those without nanomaterials. Nano-material hard alloy has stronger hardness, super abrasion resistance, impact resistance, strength toughness and high corrosion resistance which are far stronger than 100 times of steel. Henan KELAIWEI Nano Carbon Material Co., Ltd pays attention to the manufacturing research of ultra-pure whisker carbon nanotubes.

A water heater export company in Shanghai mainly exports middle and high-end water heaters to European and American countries. It pays attention to the scientific and technological content of the products, the energy saving of the products, the Environmental Protection of the products, and the continuous improvement of the product performance and the reduction of purchasing costs, so as to improve the profit rate of the product. I saw the introduction of our company's far infrared paper product in a show, and then I tried it out. Now I have become a major customer of our company.

The research and development team of Henan KELAIWEI nano-Carbon Material Co., Ltd. has been striving for the high-end nano-material industry of the motherland for more than 20 years, and finally relies on technology self-research, patent invention, high-end manufacturing technology, professional services expand overseas nanomaterials market in more than 60 countries and regions. KELAIWEI will build the project of "whisker carbon nano-tube powder" with an annual output of 300 tons, which will surely supply customers with high-end products and advanced technical services stably.

Traditional conductive agent products can no longer meet the manufacturing requirements of new high-end lithium batteries. KELAIWEI company is willing to help you develop the high-end lithium battery conductive agent market. The new type of conductive agent products researched and developed by KELAIWEI company will be presented in the exhibition area of KELAIWEI company in "2020 International Exhibition of heat conducting and heat dissipation materials and equipment in Shenzhen Convention and Exhibition Center" on August 27th, 2020.

Is the mass production of carbon nanotubes possible? The financial strength and the research and development strength of the technical team of KELAIWEI nano carbon materials company are very strong. KELAIWEI Jiangxi company and Henan company have applied for more than 100 patented technologies. Our company formulates the company's technological process and manufacturing and processing equipment by virtue of independent intellectual property rights, and has invested 0.55 billion yuan successively to build production bases in Jiangsu and Henan. KELAIWEI company has the strength to continuously provide products and services for you.

Is the mass production of carbon nanotubes possible? Henan KELAIWEI Nano Carbon Material Co., Ltd. is one of the well-known enterprises in the high-end nano materials industry. KELAIWEI owns 2 international PCT patents, 9 national patents, more than 40 industry papers and 2 monograph on carbon nanotube industry...... In the field of high-end nanomaterials, the leaders of KELAIWEI company make decisions to continuously invest heavily in research and development. Our company will continue to tackle key problems, continue to break the technology monopoly of foreign industries, and make contributions to the development of nanomaterials technology in our motherland.

The technological achievements of Henan KELAIWEI Nano Carbon Material Co., Ltd are continuous. Under the leadership of Professor Sun, the chief engineer of KELAIWEI's technical team, once again obtained the technical patent in the synthesis of whisker carbon nanotube materials. It is reported that the technical patent number obtained this time is "ZL201210304345.7". The technical name is "automatic and continuous production of whisker carbon nanotubes synthesis device".

Carbon nanotubes are used in the manufacture of PI heating film for CNT batteries. The PI heating sheet made of two-layer polyimide film by pressing carbon nanotube conductive film at high temperature benefits from the ultra-high conductivity, very strong toughness (100 times of steel strength) and thermal conductivity of carbon nanotubes, it has strong flexibility and thermal conductivity, and its quality is very, very light. Henan KELAIWEI Nano Carbon Material Co., Ltd. is looking for powerful companies to carry out cooperation.

The rubber tire manufacturer dedicated to mining equipment in a city in northern China has long been committed to the production, research and manufacture of highly wear-resistant automobile rubber tires. Its wear-resistant automobile rubber tire products are exported to domestic and foreign markets and occupy an important position in the market. All of this is related to the company's unremitting pursuit for the application of new technologies, new products and new processes. This company has been using Korean-made carbon nanotubes before, with high prices, later, I learned from the exhibition that our company's carbon nanotube products are reduced and the quality is not inferior to that of a Korean manufacturer.

Is carbon nanotubes related to rare earth? Henan KELAIWEI Nano Carbon Material Co., Ltd. is an expert in R & D and manufacturing of high-end nanomaterials and nanomaterials production equipment. KELAIWEI guarantees that the ex-factory products fully meet the industry's advanced standards, provide you with nanomaterials conforming to national standards and international standards, and provide after-sales service for technicians, so that you can buy them at ease and use them comfortably. KELAIWEI is always ready to provide you with products and services.

Is carbon nanotubes related to rare earth? Stick to the original aspiration and embrace happiness -- 5S silver certification practical training was successfully held. On April 7th, teacher Zhang conducted 5S silver medal certification training for our employees, and through a series of wonderful trainings such as explanation, Q & A, on-site actual combat simulation, re-explanation, re-Q & A, and re-actual combat promotion, let the staff of our company fully feel the importance of "lean thinking" to the improvement of their work effect, and they all expressed that they would apply the Lean Thinking knowledge gained from this training to daily production work.

Modern technology has benefited human society countless times. KELAIWEI nano carbon material company devotes itself to the research and development of nanotechnology. Nanomaterials are new materials which are widely used in high-end manufacturing industry in modern society. Nanomaterials have great advantages in hardness, toughness, electrical conductivity, thermal conductivity, mechanical property and so on, for example, the hardness of carbon nanotubes can be 100 times harder than that of steel. KELAIWEI company has been engaged in the research and development of nanomaterials for 20 years and looks forward to your cooperation.

Is there any connection between carbon nanotubes and rare earths? Since its establishment in 2018, Henan KELAIWEI nano-Carbon Material Co., Ltd. has paid great attention to the development of high-end nano-material technology and the formation of talent team. In order to realize the scientific research goal of clevere company, our company has maintained deep cooperation with many domestic universities and scientific research institutions. For example, the team of Professor Sun Xiaogang from Nanchang University, Donghua University, Zhengzhou University of light industry and other universities continuously input product technology and talent strength for our company.

KELAIWEI company has made new progress in the research of using carbon nano-slurry as wave-absorbing material. Carbon nanometer slurry products can be used as the indispensable electrical thermal conductivity additive and structural enhancement additive in high-end manufacturing industry, and can also be used as conductive wave absorbing materials. In modern aircraft manufacturing, computer equipment and even military equipment have very good application prospects. Henan KELAIWEI Nano Carbon Material Co., Ltd. Looks forward to your cooperation.

Why can't carbon nanotube batteries see products? There is an important new type of material in the high-performance polymer composite material industry-ba-based paper. BA-based paper is also called carbon nanotube paper. Carbon nanotubes have high conductivity and strong chemical stability, and high hardness and toughness, which can reach 100 times of the steel strength, but their quality is very, very light, BA-based paper can be obtained by using disordered carbon nanotubes through scientific and complex technical treatment, and Ba-based paper also has some performance advantages of carbon nanotubes.

A German wearable equipment company plans to set up a research and development center in China to conduct research and development and commercial promotion of wearable equipment. Its research and development center continued to purchase a batch of whisker carbon nanotubes for product research, and found us through the official website of Henan KELAIWEI Nano Carbon Material Co., Ltd. We introduced our product characteristics in detail, performance parameters and other data, and further answered the customer's introduction to the development and strength of our company. At present, the preliminary cooperation intention has been reached.

The carbon nanotube materials independently developed by KELAIWEI company have obtained many national authorized patents and completely reached the international advanced level. The carbon nanotube materials with high performance and strong stability developed by KELAIWEI company broke the monopoly of relevant foreign technologies and actively promoted the development of high-end carbon materials in the motherland. The management layer of Henan KELAIWEI Nano Carbon Material Co., Ltd has decided to continuously invest in the research and development of carbon nanotube materials for equipment.

KELAIWEI company holds a reading contest to enliven the working atmosphere of enterprise employees and care for their lives. This reading contest is rich in content, with warm heart stories, ancient classic poems, contemporary prose notes, and heroic deeds of the revolutionary warriors of the motherland...... The staff of KELAIWEI company are a group of lovely people, including the post-70s and the post-90s. They come from all over the world. They are a group of soldiers who bravely create brilliant achievements.

Why can't we see the products of carbon nano-tube batteries? Henan KELAIWEI nano-Carbon Material Co., Ltd. is "never stingy" in terms of investment in research and development and construction of production base ", our company has successively established the R & D and production center of KELAIWEI Jiangsu and the R & D and production center of KELAIWEI Dengfeng. Among them, KELAIWEI company even invested 0.45 billion yuan last year to expand the production line of whisker carbon nanotube powder. After the completion of this project, it will realize the annual production capacity of 500 tons of whisker carbon nanotube powder.

Why can't we see the products of carbon nano-tube batteries? Henan KELAIWEI nano-Carbon Material Co., Ltd. keeps close technical cooperation with first-class domestic universities and scientific research institutions such as Zhengzhou University of Light Industry, Donghua University and Nanchang University. The high-end nanomaterials products developed by KELAIWEI company have broad application scenarios in high-end lithium ion energy storage battery manufacturing at home and abroad, electrothermal converter preparation, high-end nanomaterials and other industries.

The sixth of the series of "reviewing the development history · encouraging young talents to compete bravely" of KELAIWEI company: events of 2013. KELAIWEI company has a tradition of insisting on technology research and development since its establishment. Professor sun of our company leads the staff of KELAIWEI research and development center to make continuous technological breakthroughs, the process and equipment of whisker carbon nanotubes prepared by our company are improved to 2~4kg/h. Compared with the previous equipment output, it has increased by more than four times.

Carbon nanotubes have very good thermal conductivity and conductivity. Only a very small amount of carbon nanotubes need to be added to the spraying materials of automobile parts for Electrostatic spraying, thus making automobile parts extremely smooth, reducing the processing process can reduce the processing cost of vehicle parts and improve the working efficiency at the same time. Henan KELAIWEI Nano Carbon Material Co., Ltd. Will intensify relevant research efforts.

The rubber tire manufacturer dedicated to mining equipment in a city in northern China has long been committed to the production, research and manufacture of highly wear-resistant automobile rubber tires. Its wear-resistant automobile rubber tire products are exported to domestic and foreign markets and occupy an important position in the market. All of this is related to the company's unremitting pursuit for the application of new technologies, new products and new processes. This company has been using Korean-made carbon nanotubes before, with high prices, later, I learned from the exhibition that our company's carbon nanotube products are reduced and the quality is not inferior to that of a Korean manufacturer.

Can carbon oxide nanotubes be taken on the train? With the rapid development of the country's comprehensive promotion of high-end manufacturing industry, the high-end nanomaterials products produced by KELAIWEI nanomaterials company are also in short supply. In view of this, our company has invested 0.45 billion, build the project of whisker carbon nanotube powder with annual processing capacity of 300 tons. KELAIWEI Co., Ltd. has always been at the forefront of carbon nanomaterials industry and is willing to explore the domestic and overseas markets of carbon nanomaterials together with its partners.

Everyone has a strong homesickness, everyone has a nostalgia that cannot be given up, and everyone has a beautiful hometown that can never be loved. In order to enrich the working and living forms of the company's employees, KELAIWEI company carried out the photography activity of "Da Mei hometown · take photos in spring. This photography activity not only enhanced the working friendship between the new and old employees in each department of KELAIWEI company, but also enriched the humanistic culture of the company.

Can carbon oxide nanotubes be taken on the train? The management layer of Henan KELAIWEI Nano Carbon Material Co., Ltd. decided to pay a large sum of money to encourage the personnel of research and development center to carry out breakthrough technological innovation. All the partners of KELAIWEI technology center devote their efforts to cooperation, collaborative innovation, adhere to the 6S lean management rules, and are willing to carry out researches on creative technological breakthroughs. The company encourages individuals to develop their technical expertise to engage in basic and prospective theoretical research. Our company is eager for excellent talents to join KELAIWEI family. Let's create the future of KELAIWEI together.

Can carbon oxide nanotubes be taken on the train? KELAIWEI nano carbon material company has established Henan KELAIWEI Nano Carbon Material Co., Ltd. and Jiangxi KELAIWEI Nano Carbon Material Co., Ltd. KELAIWEI company continues to develop, expand investment and expand the scale of production and operation. KELAIWEI company invested 0.45 billion yuan to invest 13,000 square meters of factory area in Henan, and maintained deep cooperation with experts at home and abroad. Our company attaches great importance to the research and development and innovation of advanced technologies of nanomaterials.